Skip to main content

We have taken the time to make all of these parts as close to the original factory part as possible. In most cases, you would be hard pressed to tell our CPR part from the original Ferrari part. If you have any questions or need to purchase one of these - please call Tom at 480 529-3700 or Ed at 480 208-8259. You can also e-mail Ed at edm@montiniaz.com. 

Ferrari 330 GTC Tray under glovebox
Ferrari 330 GTC Tray under glovebox

We have made an exact reproduction of the tray that is located underneath the glovebox on the 330 GTC's and GTS's. These are handmade and tooled from aluminum stock just like the originals and then covered in the correct European black vinyl with the correct grain. $495.00 

1966-1968 Ferrari 330 GTC Hood Prop Rod (Possibly other models too) -  This is an exact reproduction of the hood prop rod on a 1967 Ferrari 330 GTC. These are pictured here with the original that was used to pattern it off. These are plated and ready to install. $125.00

1966-1968 Ferrari 330 GTC Hood Opening Knob -  This if for the lever under the dash that you pull to open the hood. These are sometimes missing and impossible to find. These are exact and come chromed ready to install - $195.00

Ferrari 330 GTC tail light covers
Ferrari 330 GTC tail light covers

The tail light protective covers for inside the trunk. These are often missing or broken. We have reproduced them in fiberglass for strength and are 100% original in appearance once painted and installed in the car. $400/pr

Ferrari 330 GTC Trunk Latch Cover
Ferrari 330 GTC Trunk Latch Cover

We have reproduced the center trunk latch cover for the Ferrari 330 GTC and GTS. This is made identical to the original in fiberglass and is a very high quality part. $150.00

Ferrari 330 GTC Manual Window Crank Tool
Ferrari 330 GTC Manual Window Crank Tool

This is the correct Manual Window crank tool for the Ferrari 330 GTC / GTS . This is made from Metric stock and is identical in shape as shown next to an original Windo Crank Tool. They are correctly Cad plated like the originals. $225.00

1966-1968 Ferrari 330 GTC Door Shims to the hinge - 1/16 and 1/8 -  We had these made to more easily shim the doors on the 330 GTC models. Not all cars need them but if yours does these make it much easier! $15.00 each

Ferrari 330 GTC Front License Plate Bracket
Ferrari 330 GTC Front License Plate Bracket

Often missing on the 330 GTC and GTS is the front License plate bracket. This is made identical to the original as shown here next to an original and comes chrome plated as original. $295.00

Ferrari 330 GTC Side Air Vent Ducts
Ferrari 330 GTC Side Air Vent Ducts

These plastic side air vents are almost always distorted or cracked and caved in on the 330 GTC's due to the metal spring strap pushing on them from behind. We have made them in a much strudier fiberglass to resist this distortion. We have the drain vent hole so you can now hook up the drain tube and stop filling up your trunck and inner rear 1/4 panel with water! $295.00 

Ferrari 330 GTC Radio Delete plate
Ferrari 330 GTC Radio Delete plate

Radio Delete plate for the 330 GTC and GTS. This may well fit other cars as well. Comes with new emblem. $325.00

1966-1968 Ferrari GTC Door Glass track -  This is the track tha holds the door glass that bolts to the regulator. Correct reproduction.  $325.00 each 

1966-1968 Ferrari 330 GTC trunk lid latch hook -  This is the hook that mounts to the decklid and is made identical to the original. Another very hard to find part. $225.00

Ferrari 330 GTC Gas Door Ring
Ferrari 330 GTC Gas Door Ring

We now have the fuel door ring that goes on the body under the fuel door. Many cars are missing these and have been unavailable for years. They are made out of stainless and come polished with the 3 mounting screws ready to install. $495.00

Ferrari 330 GTC Air Compressor Cover
Ferrari 330 GTC Air Compressor Cover

Available now!!! Ferrari Fiamm Air Pump Cover for the Ferrari 330 GT, GTC and GTS and possibly others. This is the cover that covers the Horn Air Pump in front of the radiator and behind the grill. It is made in a cream color just like the original. Pictures below show it next to an original part. These are missing on most cars and the originals tend to warp and get brittle. These are an exact looking reproduction of the original. $495.00. 

330 GTC rear package tray vinyl - correct grain
330 GTC rear package tray vinyl - correct grain

We have made the correct die punch for the rear package tray speaker holes that consist of 15 rows by 16 rows and they are correctly positioned on the correct vinyl or you can supply your own vinyl. $$ Inquire due to the many variations this could be from making a new board to just punching the speaker holes in your supplied vinyl. 

1967 Ferrari 330 GTC Upper shock mount -  This is an exact reproduction of the upper shock mount that was very weak and subsequently had a factory update kit welded in to add strength. Very high quality part. $225 each

1966-1968 Ferrari 330 GTC trunk bars that hold in the gas tanks -  These are the bars that go in the trunk that hold in the dual fiberglass fuel tanks. These are identical to the originals in every respect. Very difficult to find if these are missing.  $595.00/pair

1966-1968 Ferrari 330 GTC rear bumper - Rubber bumper brackets -  These are the brackets that get bolets to the rear bumpers that hold the rubber bumpers to protect the paint. These come shiney zinc plated but do not include the rubber bumpers themselves. - $59.95 each.

Sign Guest Book  View Guest Book 

                         CPR

         260 S. Alma School Road

         Suite 122

         Mesa, AZ 85210

         Ph # 480-529-3700

       Email: tom@classicperformancerestoration.com  

 

powered by:
   Company Studio